Welcome to LDX official website!

Foshan Li Dexin Machinery Manufacturing Co., Ltd.
Foshan Li Dexin Machinery Manufacturing Co., Ltd.

 WeChat

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Specializing in the production of TCT circular saw blades, TCT band saw blades, finger joint knives, flying knives, various non-standard CNC grinding machine production lines

Check category

★ Advantages, disadvantages and differences of high speed steel and hard alloy ★

  • Time of issue:2018-11-15 09:00

(Summary description)High-speed steel: It is a high-carbon high-alloy steel. It can be divided into tungsten-based or molybdenum-based steel according to chemical composition.

★ Advantages, disadvantages and differences of high speed steel and hard alloy ★

(Summary description)High-speed steel: It is a high-carbon high-alloy steel. It can be divided into tungsten-based or molybdenum-based steel according to chemical composition.

  • Time of issue:2018-11-15 09:00
High-speed steel: It is a high-carbon high-alloy steel. It can be divided into tungsten-based or molybdenum-based steel according to chemical composition. It is divided into ordinary high-speed steel and high-performance high-speed steel according to cutting performance. High speed steel must be strengthened by heat treatment. In the quenched state, iron, chromium, some tungsten and carbon in the high-speed steel form extremely hard carbides, which can improve the wear resistance of the steel (hardness up to HRC64--68). Another part of the tungsten is dissolved in the matrix to increase the red hardness of the steel.
 
High-speed steel red hardness can reach 650 degrees.
 
High-speed steel has good strength and toughness. After sharpening, the cutting edge is sharp and the quality is stable. It is generally used to manufacture small and complex tools.
 
Cemented carbide: It is a powder of micron-sized refractory high-hardness metal carbide. It is made of cobalt, molybdenum, nickel, etc. as a binder and fired under high temperature and high pressure. The content of high-temperature carbide in cemented carbide exceeds that of high-speed steel, and the hardness is high (HRC75--80), and the wear resistance is good.
 
Carbide red hardness can reach 800-1000 degrees.
 
Carbide cutting speed is 4-7 times higher than high speed steel. High cutting efficiency.
 
The disadvantages are low bending strength, poor impact toughness, high brittleness, and low impact and vibration resistance.

CONTACT US

Tel:0086 757-82800952     Fax:0086 757-82800953 
QQ Email:1150353041@qq.com
Email:ldx@gdlidexin.com
Contact:Mr. Tu(0086 13823458229) Miss Lei(0086 13690538372
Add:No. 3, South District, Luanhe Industrial Zone, Luocun, Nanhai District, Foshan City

FOLLOW US

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Mobile website

Alibaba Mall

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

WeChat

COPYRIGHT ©2020 Foshan LDX Machinery Manufacturing Co., Ltd. All Rights Reserved