Welcome to LDX official website!

Foshan Li Dexin Machinery Manufacturing Co., Ltd.
Foshan Li Dexin Machinery Manufacturing Co., Ltd.

 WeChat

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Specializing in the production of TCT circular saw blades, TCT band saw blades, finger joint knives, flying knives, various non-standard CNC grinding machine production lines

Check category

Reasons for Reasons for the wear of Lidxin saw blade grinding machinethe wear of Lidxin saw blade grinding machine

  • Time of issue:2020-07-06 15:56

(Summary description)Reasons for the wear of Lidexin saw blade grinding machine

Reasons for Reasons for the wear of Lidxin saw blade grinding machinethe wear of Lidxin saw blade grinding machine

(Summary description)Reasons for the wear of Lidexin saw blade grinding machine

  • Time of issue:2020-07-06 15:56
Reasons for the wear of Lidexin saw blade grinding machine
 
 
Some gear grinding machine wear is caused by the failure to adjust in time, and most of the excessive errors caused by wear are caused by machine tools and other reasons.
 
Secondly, let us understand the impact and loss caused by the wear of Kappa gear grinding machine:
 
In the grinding process, various errors that exceed the tolerance are unavoidable. Common errors include: circumferential joint error, tooth direction error, surface quality requirements, etc. This will also cause a certain economic loss to individuals or enterprises.
 
So how to reduce the abrasion of Lidexin saw blade gear grinding machine?
 
1. Use the gear grinding machine to adjust and lubricate the machine in time;
 
2. Maintain the hydraulic system, electrical system and mechanical system of the gear grinding machine in time, so that it can be used and maintained at any time;
 
3. Regulate the use of power-on and power-off procedures.
 
The safe operation process of Lidexin saw blade grinding machine:
 
1. Strictly abide by the safety operation rules of the gear grinding machine and wear labor protection articles as required. Before starting, you must carefully check whether the motor, switch, line and ground are normal and firm, and check that the operating parts and buttons of the device are in the correct position.
 
2. When the upper slide and each positioning axis are not at the origin, run the origin return procedure. Check the coincidence and firmness of the upper and lower molds; check whether each positioning device meets the requirements of being processed.
 
3. After the equipment is started, it will run for 1-2 minutes and run on the skateboard for 2-3 times of full stroke. If abnormal sound or malfunction is found, it should be stopped immediately to eliminate the malfunction and work only after everything is normal.
 
4. When working, one person should direct the command to make the operator closely cooperate with the feeding and suppressing personnel to ensure that the cooperating personnel are all in a safe position to send the bending signal. The sheet must be compacted during bending to prevent the sheet from lifting and hurting. It is forbidden to fold ultra-thick iron plates or hardened steel plates, high-grade alloy steels, square steels, and sheets that exceed the performance of sheet gear gear grinding machines to avoid damage to the gear grinding machines.
 
5. The power must be cut off when adjusting the plate material and pressing the mold, and the operation is stopped after the operation. When changing the opening of the variable lower die, no material is allowed to contact the lower die.
 
6. It is found that the workpiece or mold is not correct during operation, and it should be stopped for correction. It is strictly prohibited to correct by hand during operation to prevent injury to the hand. When the gear grinding machine is working, no one is allowed to stand behind the gear grinding machine.
 
7. Regularly check the coincidence of the upper and lower molds; whether the indication of the pressure gauge meets the regulations. If an abnormality occurs, it will immediately shut down, check the cause and eliminate it in time.
 
8. Before shutting down, exit the control system program first, and then cut off the power supply. Place a wooden block on the lower mold below the cylinders on both sides to lower the upper slide onto the wooden block.
Keyword:

CONTACT US

Tel:0086 757-82800952     Fax:0086 757-82800953 
QQ Email:1150353041@qq.com
Email:ldx@gdlidexin.com
Contact:Mr. Tu(0086 13823458229) Miss Lei(0086 13690538372
Add:No. 3, South District, Luanhe Industrial Zone, Luocun, Nanhai District, Foshan City

FOLLOW US

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Mobile website

Alibaba Mall

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

WeChat

COPYRIGHT ©2020 Foshan LDX Machinery Manufacturing Co., Ltd. All Rights Reserved