Welcome to LDX official website!

Foshan Li Dexin Machinery Manufacturing Co., Ltd.
Foshan Li Dexin Machinery Manufacturing Co., Ltd.

 WeChat

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Specializing in the production of TCT circular saw blades, TCT band saw blades, finger joint knives, flying knives, various non-standard CNC grinding machine production lines

Check category

The preparation elements of saw blade grinding machine before shutdown

  • Time of issue:2020-07-21 11:30

(Summary description)The preparation elements of saw blade grinding machine before shutdown

The preparation elements of saw blade grinding machine before shutdown

(Summary description)The preparation elements of saw blade grinding machine before shutdown

  • Time of issue:2020-07-21 11:30
The preparation elements of saw blade grinding machine before shutdown
 
 
1. Before the holiday, clean up the gear grinding machine (including system, bed, spindle cooling system, tool magazine transmission parts, etc.). And take down the knife handle in the tool magazine for anti-rust treatment, and pack it separately in a clean box.
 
2. Apply anti-rust oil to the surface of the worktable, spindle, etc. to prevent rust from affecting its accuracy. The three-axis telescopic guard should also be coated with anti-rust oil. Clean up the oil and waste near the Y-axis motor under the column. Open the X and Y axis guards with an M5 Allen key to clean, and then apply anti-rust oil on the screw rod.
 
3. Check the lubricating oil level. For manual lubrication, add lubricating oil to ensure that the mechanical parts of the machine tool are in a good lubrication state.
 
4. Due to the long downtime of the machine tool, the three axes need to run to the middle position of each axis to close the machine tool and make it in a state of stress balance; avoid the limit position of the axis, and the uneven force of the casting will affect the accuracy.
 
Daily maintenance of the cooling device of the saw blade grinding machine:
 
1. Observe the oil mark on the front of the water tank, and add it in time when the cooling water decreases. Under normal circumstances, the water outlet configuration around the main shaft should at least make the oil filter at the suction port of the cooling pump completely submerged in the water.
 
2. When the cooling water is contaminated and deteriorated, it should be replaced in time. The screw plug under the water tank of the internal gear grinding machine is removed to discharge the waste liquid. After cleaning the water tank, fill in new and clean coolant.
 
3. The cooling water tank is divided into two chambers, a water tank and a pump box. The filter screen is easy to remove when it needs to be cleaned, and the cleaning is very convenient. In addition, an oil filter is installed at the entrance of the cooling pump. After that, it should be inspected and cleaned in time.
 
4. Under normal circumstances, clean the oil filter and filter screen of the internal gear grinding machine once every two months.
Keyword:

CONTACT US

Tel:0086 757-82800952     Fax:0086 757-82800953 
QQ Email:1150353041@qq.com
Email:ldx@gdlidexin.com
Contact:Mr. Tu(0086 13823458229) Miss Lei(0086 13690538372
Add:No. 3, South District, Luanhe Industrial Zone, Luocun, Nanhai District, Foshan City

FOLLOW US

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Mobile website

Alibaba Mall

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

WeChat

COPYRIGHT ©2020 Foshan LDX Machinery Manufacturing Co., Ltd. All Rights Reserved