Welcome to LDX official website!

Foshan Li Dexin Machinery Manufacturing Co., Ltd.
Foshan Li Dexin Machinery Manufacturing Co., Ltd.

 WeChat

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Specializing in the production of TCT circular saw blades, TCT band saw blades, finger joint knives, flying knives, various non-standard CNC grinding machine production lines

Check category

How to use the saw blade of Li Dexin saw blade grinding machine

  • Time of issue:2020-09-07 19:00

(Summary description)How to use the saw blade of Li Dexin saw blade grinding machine

How to use the saw blade of Li Dexin saw blade grinding machine

(Summary description)How to use the saw blade of Li Dexin saw blade grinding machine

  • Time of issue:2020-09-07 19:00
 
1. For saw blades of different specifications and purposes, the angle of the blade head and the form of the base body are different, so try to use them according to their corresponding occasions;
 
2. The size and shape accuracy of the main shaft and splint of the equipment have a great influence on the use effect. Check and adjust before installing the saw blade. In particular, the factors that affect the clamping force on the contact surface of the splint and the saw blade and cause displacement and slip must be eliminated;
 
3. Pay attention to the working conditions of the saw blade at any time. If abnormalities occur, such as vibration, noise, and material removal on the processing surface, the machine must be stopped and adjusted in time, and the grinding should be repaired in time to maintain peak profit;
 
4. The sharpening of the saw blade must not change its original angle to avoid local sudden heating and cooling of the blade. It is best to professionally sharpen it.
 
5. Saw blades that are not used temporarily should be hung vertically to avoid long-term laying flat, and should not be piled on top of them, and the knife head should be protected.
 
 
 
 
The specific installation requirements of the saw blade of Li Dexin saw blade grinding machine
 
1. The equipment is in good condition, the main shaft has no deformation, no diameter jump, firm installation and fixation, no vibration, etc.
 
2. Check whether the saw blade is damaged, whether the tooth profile is complete, whether the saw board is smooth and clean, and whether there are other abnormal phenomena to ensure safe use.
 
3. When assembling, make sure that the arrow direction of the saw blade is consistent with the rotation direction of the equipment spindle.
 
4. When the saw blade is installed, keep the shaft, chuck and flange clean. The inner diameter of the flange is consistent with the inner diameter of the saw blade. Ensure that the flange and the saw blade are tightly combined. Install the positioning pin and tighten the nut. The size of the flange should be appropriate, and the outer diameter should not be less than 1/3 of the diameter of the saw blade.
 
5. Before the equipment is started, under the condition of ensuring safety, there is a single person to operate the equipment, jog idling, check whether the steering of the equipment is correct, there is no vibration, and the saw blade is idling for a few minutes after it is installed, and it will be normal after no slipping, swing or bounce. jobs.
Keyword:

CONTACT US

Tel:0086 757-82800952     Fax:0086 757-82800953 
QQ Email:1150353041@qq.com
Email:ldx@gdlidexin.com
Contact:Mr. Tu(0086 13823458229) Miss Lei(0086 13690538372
Add:No. 3, South District, Luanhe Industrial Zone, Luocun, Nanhai District, Foshan City

FOLLOW US

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Mobile website

Alibaba Mall

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

WeChat

COPYRIGHT ©2020 Foshan LDX Machinery Manufacturing Co., Ltd. All Rights Reserved