Welcome to LDX official website!

Foshan Li Dexin Machinery Manufacturing Co., Ltd.
Foshan Li Dexin Machinery Manufacturing Co., Ltd.

 WeChat

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Specializing in the production of TCT circular saw blades, TCT band saw blades, finger joint knives, flying knives, various non-standard CNC grinding machine production lines

Check category

The advantages, disadvantages and differences of high speed steel and cemented carbide

  • Time of issue:2020-11-02 16:16

(Summary description)The advantages, disadvantages and differences of high speed steel and cemented carbide

The advantages, disadvantages and differences of high speed steel and cemented carbide

(Summary description)The advantages, disadvantages and differences of high speed steel and cemented carbide

  • Time of issue:2020-11-02 16:16
High-speed steel: It is high-carbon and high-alloy steel. According to chemical composition, it can be divided into tungsten series and molybdenum series steel. According to cutting performance, it can be divided into ordinary high-speed steel and high-performance high-speed steel. High-speed steel must be strengthened by heat treatment. In the quenched state, the iron, chromium, part of tungsten and carbon in the high-speed steel form extremely hard carbides, which can improve the wear resistance of the steel (hardness can reach HRC64-68). The other part of tungsten dissolves in the matrix and increases the red hardness of the steel.
  
   The red hardness of high-speed steel can reach 650 degrees.
  
   High-speed steel has good strength and toughness. After sharpening, the cutting edge is sharp and the quality is stable. It is generally used to manufacture small, complex-shaped tools.
  
   Cemented Carbide: It is a powder of micron-level refractory high-hardness metal carbide, which is made by firing under high temperature and high pressure with cobalt, molybdenum, nickel, etc. as a binder. The content of high-temperature carbides in cemented carbide exceeds that of high-speed steel, with high hardness (HRC75-80) and good wear resistance.
  
   Hard alloy red hardness can reach 800-1000 degrees.
  
   The cutting speed of cemented carbide is 4-7 times higher than that of high-speed steel. High cutting efficiency.
  
  The disadvantages are low bending strength, poor impact toughness, high brittleness, low impact resistance and low vibration resistance.
Keyword:

CONTACT US

Tel:0086 757-82800952     Fax:0086 757-82800953 
QQ Email:1150353041@qq.com
Email:ldx@gdlidexin.com
Contact:Mr. Tu(0086 13823458229) Miss Lei(0086 13690538372
Add:No. 3, South District, Luanhe Industrial Zone, Luocun, Nanhai District, Foshan City

FOLLOW US

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Mobile website

Alibaba Mall

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

WeChat

COPYRIGHT ©2020 Foshan LDX Machinery Manufacturing Co., Ltd. All Rights Reserved