Welcome to LDX official website!

Foshan Li Dexin Machinery Manufacturing Co., Ltd.
Foshan Li Dexin Machinery Manufacturing Co., Ltd.

 WeChat

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Specializing in the production of TCT circular saw blades, TCT band saw blades, finger joint knives, flying knives, various non-standard CNC grinding machine production lines

Check category

​Operation process of multi-saw gear grinding machine

  • Time of issue:2021-03-01 10:34

(Summary description)Operation process of multi-saw gear grinding machine

​Operation process of multi-saw gear grinding machine

(Summary description)Operation process of multi-saw gear grinding machine

  • Time of issue:2021-03-01 10:34
Operation process of multi-saw gear grinding machine
 
 
1. Before work:
 
   1. Carry out a detailed inspection of the power switch of the aluminum cutting machine, the tightness of the saw blade, and the saw blade guard or baffle. The console is stable and there should be sufficient lighting for night operations.
 
   2. Turn on the main switch of the aluminum cutting machine, try a few turns without load, and allow it to start after confirmation.
 
2. At work:
 
   1. Operation with gloves is strictly prohibited. If dust is caused during operation, wear a mask or face shield.
 
   2. Don't try to cut small and short workpieces that are not clamped.
 
   3. Do not perform strong cutting and sawing operations, and let the machine idling for more than 10 seconds to make the motor reach full speed before cutting.
 
   4. No one is allowed to stand behind the discharge port of the saw to prevent short materials from flying out and hurting people.
 
   5. Do not lean over or bypass the body, and do not perform any operations from the saw blade when the saw blade is not stopped.
 
   6. Do not operate when the guard is not in place, and do not put your hands within 15 cm of the saw blade.
 
   7. Cut off the power supply before repairing or replacing parts of the aluminum cutting machine, and wait for the saw blade to stop completely.
 
   8. If abnormal sound is found, the aluminum cutting machine should be stopped immediately for inspection.
 
3. After work
 
   1. Turn off the main power supply of the aluminum cutting machine
 
   2. Clean and tidy up the workbench and venue
 
Round tube chamfering machine of multi-saw gear grinding machine
 
The round pipe chamfering machine has a fine chamfered surface without burrs, just like a cross-polished surface. It is suitable for the chamfering of various small molds, small molds, and mechanical parts. During operation, hold the workpiece against the slide rail and cut from left to right. The slide rail is made of die steel after heat treatment, which is durable. Simple operation, regular chamfering, convenient adjustment, economical and reliable.
 
The staff must wear gloves during the chamfering operation of the round pipe chamfering machine. Before use, first turn on the switch to make the cutter head rotate, pay attention to the direction of rotation of the cutter head, and then move the processed object forward and cut from the beginning. Check whether the two screws of the spindle are fastened, and whether the blade press-fitting screws are loose. When replacing the blade, remove the guide plate, and after installing the blade, check whether it is sturdy before operation.
 
Compared with the gas cutting method, the energy consumption is low, the groove speed is fast (more than three times that of gas cutting), and there is no need to remove burrs. Compared with other cutting equipment such as edge planers and dragon planers, round pipe chamfering machines are inexpensive, occupy a small area, consume only one-tenth of their energy, and do not need to clamp the workpiece during processing, so it is convenient to use, The work efficiency is high, and the bracket can not be restricted by the length and width of the workpiece. Therefore, the use of round pipe chamfering machine to process the groove is far better than other equipment, and it is the ideal equipment for steel plate welding before welding in China.
 
Using the rolling shear principle, in the relative movement of the steel plate driven by the rotation of the hob, the corners of the steel plate are cut off. The round pipe chamfering machine can meet the needs of the groove before welding such as A3 steel plate, stainless steel plate and 16Mn plate, and the processed groove The size is correct and the surface is smooth.
Keyword:

CONTACT US

Tel:0086 757-82800952     Fax:0086 757-82800953 
QQ Email:1150353041@qq.com
Email:ldx@gdlidexin.com
Contact:Mr. Tu(0086 13823458229) Miss Lei(0086 13690538372
Add:No. 3, South District, Luanhe Industrial Zone, Luocun, Nanhai District, Foshan City

FOLLOW US

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Mobile website

Alibaba Mall

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

WeChat

COPYRIGHT ©2020 Foshan LDX Machinery Manufacturing Co., Ltd. All Rights Reserved