Welcome to LDX official website!

Foshan Li Dexin Machinery Manufacturing Co., Ltd.
Foshan Li Dexin Machinery Manufacturing Co., Ltd.

 WeChat

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Specializing in the production of TCT circular saw blades, TCT band saw blades, finger joint knives, flying knives, various non-standard CNC grinding machine production lines

Check category

Introduction of bimetal band saw blade gear grinding machine

  • Time of issue:2021-03-08 14:53

(Summary description)Introduction of bimetal band saw blade gear grinding machine

Introduction of bimetal band saw blade gear grinding machine

(Summary description)Introduction of bimetal band saw blade gear grinding machine

  • Time of issue:2021-03-08 14:53
Introduction of bimetal band saw blade gear grinding machine
 
 
The bimetal band saw blade gear grinding machine has good universality. It can be matched and matched with various types of band saws, and it is consistent with various types of metal continuous sawing. As a tool, its quality can be evaluated and measured from multiple angles. The more important indicator is its service life. The universality of the bimetallic band saw blade is enough to reflect this tool. Its good adaptability saves installation time and improves production efficiency. Another highlight of the saw blade is its bimetallicity. The steel with higher purity is harder and brittle. Although the strength is high, the toughness is not enough. The significance of the bimetal is that the 8% cobalt is added to enhance the cutting hardness of the teeth. Performance spring steel has strong compressive strength, which can complete the work of higher strength and continuous use for a long time.
 
 
1. If the saw blade of the alloy-head saw blade production line is not used immediately, it should be laid flat or hung by the inner hole. No other objects or footsteps should be stacked on the flat saw blade, and attention should be paid to moisture and rust prevention.
 
2. When the saw blade is no longer sharp and the cutting surface is rough, it must be re-sharpened in time. Grinding cannot change the original angle and destroy the dynamic balance.
 
3. The internal diameter correction and positioning hole processing of the saw blade must be carried out by the manufacturer. If the processing is poor, it will affect the product use effect and may cause danger. In principle, the hole expansion should not exceed the original diameter of 20mm, so as not to affect the balance of stress.
 
 
Woodworking saw blade gear grinding machine is one of the main equipment in some industries, these equipments are very important when working!
 
According to the needs of the saw blade, many factors must be considered in the design, among which the most important is the angle of the alloy bit of the tooth end of the saw blade.
 
Regardless of the rake angle (inner angle), rear angle (outer circle), and side, there is a designated angle in the design. If the angle is not correct, then there will be serious consequences such as low efficiency and unavailability in actual use. Whether it is production, refurbishment, or grinding of saw blades, the saw blades must be professionally ground.
 
Therefore, the selection of woodworking saw blade gear grinding machine is a key link in the production or grinding of saw blades. When choosing a machine, first look at the rigidity and accuracy of the machine. The accuracy depends on the design principle of the machine and the performance of the machine parts. 
 
Keyword:

CONTACT US

Tel:0086 757-82800952     Fax:0086 757-82800953 
QQ Email:1150353041@qq.com
Email:ldx@gdlidexin.com
Contact:Mr. Tu(0086 13823458229) Miss Lei(0086 13690538372
Add:No. 3, South District, Luanhe Industrial Zone, Luocun, Nanhai District, Foshan City

FOLLOW US

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Mobile website

Alibaba Mall

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

WeChat

COPYRIGHT ©2020 Foshan LDX Machinery Manufacturing Co., Ltd. All Rights Reserved