Welcome to LDX official website!

Foshan Li Dexin Machinery Manufacturing Co., Ltd.
Foshan Li Dexin Machinery Manufacturing Co., Ltd.

 WeChat

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Specializing in the production of TCT circular saw blades, TCT band saw blades, finger joint knives, flying knives, various non-standard CNC grinding machine production lines

Check category

Precautions for safe operation of multi-blade saw gear grinding machine

  • Time of issue:2021-07-26 10:55

(Summary description)Precautions for safe operation of multi-blade saw gear grinding machine

Precautions for safe operation of multi-blade saw gear grinding machine

(Summary description)Precautions for safe operation of multi-blade saw gear grinding machine

  • Time of issue:2021-07-26 10:55
Precautions for safe operation of multi-blade saw gear grinding machine
 
 
(1) Wear protective equipment before operation.
 
(2) The machine tool worker must master the function of each button and the operating precautions. The protective door of the machine tool must be closed before processing, and the tools around the machine tool must be placed neatly.
 
(3) When operating the machine tool, pay attention to the content on the warning signs of each part of the machine tool. When the machine tool is energized, the operator should never open or touch the part of the machine tool with a lightning symbol and equipped with a strong electric device to prevent electric shock. When thundering, turn off the multi-saw gear grinding machine. Otherwise, it is easy to burn out the module or lose the changed data, causing unnecessary losses.
 
(4) After the tool has been clamped, the manual method should be used for trial cutting.
 
(5) During the operation of the machine tool, do not remove chips, and do not touch the moving parts of the machine tool with your hands.
 
(6) When removing chips, use professional tools to avoid being scratched by chips.
 
(7) When measuring the workpiece, it can only be carried out when the multi-saw gear grinding machine is stopped.
 
(8) After the work is over, clean up the machine tool and control equipment, and maintain the machine tool in time. When maintaining electrical installations, you must first cut off the power supply.
 
(9) After all the work is over, make sure to cut off the power supply of the RV reducer to repair the system before leaving.
 
The key technology of multi-saw gear grinding machine rack:
 
1. Technology
 
(1) Due to the particularity of the rack, the gear grinding wheel is generally wide and can grind multiple tooth grooves at one time. At this time, the grinding load is relatively large, and the rigidity of the machine tool needs to be sufficiently high and the spindle power is large enough.
 
(2) The use of a single piece of small fillet diamond roller can meet any modulus and any tooth surface requirements (with or without chamfering, non-standard rack, etc.). The automatic dressing of the rack grinding wheel greatly reduces the user's cost and operation Difficulty.
 
(3) The working table is wide enough to realize the clamping and processing of multiple racks at one time, which also requires the machine tool to have sufficient rigidity.
 
2. On-machine testing technology
 
Through the on-machine inspection, the inspection report can be quickly output, and the compensation processing can be carried out according to the inspection results, which greatly shortens the process of processing-three-coordinate inspection-adjusting the machine tool-reprocessing.
 
3. Intelligent process software
 
The machine tool operator pays the most attention to the ease of use of the machine tool. The gear grinding machine must have an intuitive and easy-to-operate man-machine interface, an intelligent error-proof mechanism and an intelligent process operation process.
 
4. Dynamic balancing technology
 
Dynamic balance is a common technology for all grinding machine tools. If the dynamic balance of the grinding wheel spindle is not good, it will directly affect the grinding accuracy of the workpiece, which will cause the machine tool to have large vibrations and poor grinding accuracy.
 
5. AE technology
 
AE technology is actually an application of acoustic emission sensors. Through AE technology, automatic centering of workpieces, automatic machining allowance detection and machining allowance distribution, etc. can be realized. In addition, AE is also an important technical means to prevent machine collision.
Keyword:

CONTACT US

Tel:0086 757-82800952     Fax:0086 757-82800953 
QQ Email:1150353041@qq.com
Email:ldx@gdlidexin.com
Contact:Mr. Tu(0086 13823458229) Miss Lei(0086 13690538372
Add:No. 3, South District, Luanhe Industrial Zone, Luocun, Nanhai District, Foshan City

FOLLOW US

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Mobile website

Alibaba Mall

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

WeChat

COPYRIGHT ©2020 Foshan LDX Machinery Manufacturing Co., Ltd. All Rights Reserved