Welcome to LDX official website!

Foshan Li Dexin Machinery Manufacturing Co., Ltd.
Foshan Li Dexin Machinery Manufacturing Co., Ltd.

 WeChat

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Specializing in the production of TCT circular saw blades, TCT band saw blades, finger joint knives, flying knives, various non-standard CNC grinding machine production lines

Check category

The influence of long-time work on the carbide saw blade gear grinding machine

  • Time of issue:2021-08-10 18:34

(Summary description)The influence of long-time work on the carbide saw blade gear grinding machine

The influence of long-time work on the carbide saw blade gear grinding machine

(Summary description)The influence of long-time work on the carbide saw blade gear grinding machine

  • Time of issue:2021-08-10 18:34
The influence of long-time work on the carbide saw blade gear grinding machine
 
 
1. What is the difference between a 30-tooth saw blade and a 40-tooth saw blade?
 
1. The cutting speed is different.
 
2. The gloss is different.
 
3. The angle of the teeth of the saw blade is also different.
 
4. The saw blade has different requirements for hardness, flatness, and end face runout. In addition, there are also certain requirements for the speed of the machine and the feeding speed of the wood.
 
5. This also has a lot to do with the accuracy of the saw blade equipment.
 
2. What is the difference between 40 teeth and 60 teeth?
 
Because of the low friction, the 40 teeth are labor-saving and the sound is low, but the 60 teeth cut smoothly. General carpenters use 40 teeth. The price is the same. If you want a small sound, use a thicker one, but a thinner one is better. The more teeth, the smoother the sawing profile. If your machine is stable, the sound will be lower.
 
3. Why does the alloy saw blade open?
 
1. Prevent the saw blade from being clamped;
 
2. Increase friction.
 
3. What is the difference between a saw blade with more teeth and a saw blade with less teeth?
 
Generally speaking, the more teeth and the more blades cut per unit time, the better the cutting performance. However, the more teeth, the higher the price of the saw blade. However, if the teeth are too dense, the amount of debris between the teeth will become smaller, which will easily cause the saw blade to heat up. In addition, there are too many saw teeth. If the feed amount is not matched properly, the cutting amount of each tooth is small, which will increase the friction between the cutting edge and the workpiece and affect the service life of the cutting edge. Usually the tooth pitch is 15-25mm, and a reasonable number of teeth should be selected according to the sawing material.
 
Foshan Lidexin Machinery Manufacturing Co., Ltd. is a main business saw blade grinding machine, TCT saw blade gear grinding machine, automatic saw blade gear grinding machine, CNC saw blade gear grinding machine, saw blade gear grinding machine, TCT saw blade gear grinding Machine, multi-blade saw grinding machine and other saw blade grinding machine manufacturers.
Keyword:

CONTACT US

Tel:0086 757-82800952     Fax:0086 757-82800953 
QQ Email:1150353041@qq.com
Email:ldx@gdlidexin.com
Contact:Mr. Tu(0086 13823458229) Miss Lei(0086 13690538372
Add:No. 3, South District, Luanhe Industrial Zone, Luocun, Nanhai District, Foshan City

FOLLOW US

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Mobile website

Alibaba Mall

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

WeChat

COPYRIGHT ©2020 Foshan LDX Machinery Manufacturing Co., Ltd. All Rights Reserved