Welcome to LDX official website!

Foshan Li Dexin Machinery Manufacturing Co., Ltd.
Foshan Li Dexin Machinery Manufacturing Co., Ltd.

 WeChat

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Specializing in the production of TCT circular saw blades, TCT band saw blades, finger joint knives, flying knives, various non-standard CNC grinding machine production lines

Check category

What aspects should be paid attention to in the use of diamond saw blades in carbide saw blade grinding machines

  • Time of issue:2021-12-06 14:18

(Summary description)What aspects should be paid attention to in the use of diamond saw blades in carbide saw blade grinding machines

What aspects should be paid attention to in the use of diamond saw blades in carbide saw blade grinding machines

(Summary description)What aspects should be paid attention to in the use of diamond saw blades in carbide saw blade grinding machines

  • Time of issue:2021-12-06 14:18
What aspects should be paid attention to in the use of diamond saw blades in carbide saw blade grinding machines
 
 
In fact, there are many precautions for diamond saw blades in actual operation. Only when you notice, you will not encounter problems during the operation of diamond saw blades. Today, the gear grinding machine manufacturer will share with you the aspects that should be paid attention to when using diamond saw blades.
 
When installing the diamond saw blade, keep the shaft, chuck and flange clean. The inner diameter of the flange is consistent with the inner diameter of the diamond saw blade to ensure that the flange and the diamond saw blade are tightly combined. Install the fine and accurate positioning pins and tighten them. Nut. The size of the flange should be appropriate, and the outer diameter should not be less than 1/3 of the diameter of the diamond saw blade.,
 
Before starting the facilities and equipment, if safety is ensured, there is a single person to operate the facilities and equipment, start idling, check whether the steering of the facilities and equipment is correct, there is no vibration, and the diamond saw blade will be idling for a few minutes after it is installed, and there is no slip, swing or bounce. After working normally. When working, the workpiece should be fixed. The fine and accurate positioning of the profile is completely in line with the direction of the knife, so as to avoid abnormal cutting. Do not apply side pressure or curve cutting. The knife should be smooth and avoid the impact of the knife edge against the workpiece, which will directly cause The diamond saw blade is damaged, or the workpiece flies out, causing an accident.
 
When working, if you find abnormal sound and vibration, rough cutting surface, or produce peculiar smell, you must immediately terminate the operation, check as soon as possible, and eliminate the fault to avoid accidents. When starting and stopping cutting, do not feed the tool too fast to avoid broken teeth and damage. If you are cutting aluminum alloy or other metals, you must use a special cooling lubricant to prevent the diamond saw blade from overheating, generating tooth paste, and other damage, which affects the quality and quality of the cut product. Facility and equipment chip flutes and slag suction devices ensure unobstructed, to prevent slag accumulation and agglomeration, affecting production and processing and safety. When the diamond saw blade is dry cutting, please do not cut continuously for a long time, so as not to affect the service life of the diamond saw blade and the good cutting effect; wet cutting should be cut with water to prevent leakage.
 
Keyword:

CONTACT US

Tel:0086 757-82800952     Fax:0086 757-82800953 
QQ Email:1150353041@qq.com
Email:ldx@gdlidexin.com
Contact:Mr. Tu(0086 13823458229) Miss Lei(0086 13690538372
Add:No. 3, South District, Luanhe Industrial Zone, Luocun, Nanhai District, Foshan City

FOLLOW US

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Mobile website

Alibaba Mall

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

WeChat

COPYRIGHT ©2020 Foshan LDX Machinery Manufacturing Co., Ltd. All Rights Reserved