Welcome to LDX official website!

Foshan Li Dexin Machinery Manufacturing Co., Ltd.
Foshan Li Dexin Machinery Manufacturing Co., Ltd.

 WeChat

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Specializing in the production of TCT circular saw blades, TCT band saw blades, finger joint knives, flying knives, various non-standard CNC grinding machine production lines

Check category

How does the grinding wheel of the saw blade grinder work?

  • Time of issue:2022-02-11 14:00

(Summary description)How does the grinding wheel of the saw blade grinder work?

How does the grinding wheel of the saw blade grinder work?

(Summary description)How does the grinding wheel of the saw blade grinder work?

  • Time of issue:2022-02-11 14:00
How does the grinding wheel of the saw blade grinder work?
 
 
The grinding wheel frame can be fed in a straight direction. The gear to be ground is supported by the indexing frame and the tailstock, and goes through the worktable for longitudinal reciprocating motion to grind the tooth surface, and indexing is performed after each tooth is ground. On the machine tool for grinding helical gears, the grinding wheel can rotate a point of view according to the helical angle of the workpiece, and the workpiece can be additionally transformed during the reciprocating motion.
 
If the machine tool grinding wheel can make the grinding wheel enter the internal gear workpiece, the internal gear can be ground. The forming grinding wheel gear grinding machine has a simple layout, high efficiency, and the precision can reach grade 5. It is suitable for mass production. The grinding wheel of the forming grinding wheel saw blade grinding machine processed according to the forming method is shaped by the forming grinding wheel dresser in the axial section. It is especially suitable for gears with a small number of teeth. The speed of the grinding head feeding slide plate of the gear grinding machine is uneven or there is impact phenomenon, and the hydraulic speed control valve is faulty. Remove the speed control valve and clean or replace it. Solenoid valve failure, remove for cleaning or replacement. If the guide rail is not parallel, loosen the adjusting screw and adjust it again.
 
The unbalanced angular speed of the saw blade grinding machine is that the angular speed is too small or the angular force is too fast, which causes the swaying impact force of the corner to be too large and makes a loud noise, and the pressure of the positioning cylinder is too large, and its throttle valve should be adjusted. If the set flow rate of the left and right swing angle throttle valve is not appropriate, the throttle valve should be adjusted.
 
Foshan Li Dexin Machinery Manufacturing Co., Ltd. is a professional saw blade grinding machine, TCT saw blade grinding machine, automatic saw blade grinding machine, CNC saw blade grinding machine, saw blade grinding machine, TCT band saw blade grinding Saw blade grinding machine manufacturers such as tooth machines, multi-blade saw tooth grinding machines, etc.
Keyword:

CONTACT US

Tel:0086 757-82800952     Fax:0086 757-82800953 
QQ Email:1150353041@qq.com
Email:ldx@gdlidexin.com
Contact:Mr. Tu(0086 13823458229) Miss Lei(0086 13690538372
Add:No. 3, South District, Luanhe Industrial Zone, Luocun, Nanhai District, Foshan City

FOLLOW US

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Mobile website

Alibaba Mall

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

WeChat

COPYRIGHT ©2020 Foshan LDX Machinery Manufacturing Co., Ltd. All Rights Reserved