Welcome to LDX official website!

Foshan Li Dexin Machinery Manufacturing Co., Ltd.
Foshan Li Dexin Machinery Manufacturing Co., Ltd.

 WeChat

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Specializing in the production of TCT circular saw blades, TCT band saw blades, finger joint knives, flying knives, various non-standard CNC grinding machine production lines

Check category

CNC saw blade grinding machine manufacturers saw blade grinding machine alloy sawtooth grinding

  • Time of issue:2019-03-09 16:51

(Summary description)CNC saw blade grinding machine manufacturers saw blade grinding machine alloy sawtooth grinding

CNC saw blade grinding machine manufacturers saw blade grinding machine alloy sawtooth grinding

(Summary description)CNC saw blade grinding machine manufacturers saw blade grinding machine alloy sawtooth grinding

  • Time of issue:2019-03-09 16:51
CNC saw blade grinding machine manufacturers saw blade grinding machine alloy sawtooth grinding
 
 
 
(1) The use of a precision, stable vibration-free sharpening machine, as well as a suitable diamond grinding wheel, to repair the alloy serrations according to the specified operating procedures will extend the life of the saw blade. If you use a manual sharpening device, you need to have a precise limit device and detect the end jump of the tooth tip.
 
 
 
(2) The resin, debris and other debris adhering to the saw blade must be cleaned with a cleaning agent before grinding.
 
 
 
(3) When the saw blade grinding machine is sharpened, it is necessary to strictly follow the original geometric design of the saw blade. It is recommended to use the sharpening method of the rake angle and the back angle at the same time, which can increase the number of grinding times. Achieve a long service life of zui.
 
Product.jpg
 
 
 
CNC saw blade grinding machine manufacturers operate as follows:
 
 
 
1. After the above distance is adjusted, it is necessary to balance the push and swing arms, and push and grasp the guide and the grinding wheel to separate the two fingers.
 
 
 
2, secondly turn on the power, pay attention to the change of high-speed gear, we should slow down the teeth, the head is removed from the rod to put the stability of the teeth.
 
 
 
3. Adjust the push-adjustment lever to push the grab and the guide disc to force it.
 
 
 
4, mediation on the tooth adjustment rod, after adjustment, the front and rear angles just wear it.
 
 
 
5. Adjust the tooth depth adjustment rod as needed to grind the saw blade tooth shape.
 
 
 
6. Chamfering As long as the machine head moves up and down 150 degrees, the guide grinding piece can adjust 2 teeth.
 
Keyword:

CONTACT US

Tel:0086 757-82800952     Fax:0086 757-82800953 
QQ Email:1150353041@qq.com
Email:ldx@gdlidexin.com
Contact:Mr. Tu(0086 13823458229) Miss Lei(0086 13690538372
Add:No. 3, South District, Luanhe Industrial Zone, Luocun, Nanhai District, Foshan City

FOLLOW US

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Mobile website

Alibaba Mall

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

WeChat

COPYRIGHT ©2020 Foshan LDX Machinery Manufacturing Co., Ltd. All Rights Reserved