Welcome to LDX official website!
Foshan Li Dexin Machinery Manufacturing Co., Ltd.
Specializing in the production of TCT circular saw blades, TCT band saw blades, finger joint knives, flying knives, various non-standard CNC grinding machine production lines
Is the installation of automatic saw blade grinding machine high professional requirements?
- Time of issue:2022-05-31 14:39
(Summary description)Is the installation of automatic saw blade grinding machine high professional requirements?
Is the installation of automatic saw blade grinding machine high professional requirements?
(Summary description)Is the installation of automatic saw blade grinding machine high professional requirements?
- Time of issue:2022-05-31 14:39
Is the installation of automatic saw blade grinding machine high professional requirements?
When installing the band saw blade grinder, you should pay attention to leveling and fixing first, and also check whether the fixing screws of each part are tightened.
Then turn on the power supply and check the rotation of the motor. If the rotation direction is opposite to the mark, you can connect any two phases of the three-phase power supply in reverse. The cross-section angle of the grinding wheel should be consistent with the tooth profile angle of the sawtooth to be ground. First lift and lower the grinding wheel, install the saw blade on the saw blade seat, install the pressure plate, turn the handwheel, and the lead screw drives the saw blade to move up and down, adjust the saw blade to 30-50 mm beyond the indenter, and press it with the indenter . Adjust the positioning position of the teeth at the end of the tooth picking action, and align the grinding wheel with the teeth of the saw blade.
Is the installation of a gear grinding machine high professional requirements?
If the saw blade is not used immediately, it should be placed flat or suspended using the inner hole. No other items or feet should be stacked on the flat saw blade, and attention should be paid to moisture and rust prevention.
Before using the knife sharpener, you should read the manual carefully and operate it according to the requirements to prevent mistakes and accidents. Pay attention to check whether the three-phase four-wire power supply is normal, and whether the running direction of the grinding head and grinding wheel is consistent with the direction indicated by the stroke button. When the machine is running, the rails should be lubricated with oil at any time to prevent the rails from being worn due to lack of oil. In the process of tool setting, if there is an error on the left and right sides, the adjustment screw on the tool holder can be used to adjust. In the process of sharpening the knife, it should be noted that the feed rate should not be too large, generally controlled between 0.0-0.02mm, to prevent the blade from being deformed due to excessive feed rate and excessive heat, making the sharpening edge out of line .
Foshan Li Dexin Machinery Manufacturing Co., Ltd. is a professional saw blade grinding machine, alloy saw blade grinding machine, automatic saw blade grinding machine, CNC saw blade grinding machine, saw blade grinding machine, alloy saw blade grinding Saw blade grinding machine manufacturers such as machine, multi-blade saw grinding machine, etc.
CONTACT US
Tel:0086 757-82800952 Fax:0086 757-82800953
QQ Email:1150353041@qq.com
Email:ldx@gdlidexin.com
Contact:Mr. Tu(0086 13823458229) Miss Lei(0086 13690538372)
Add:No. 3, South District, Luanhe Industrial Zone, Luocun, Nanhai District, Foshan City
COPYRIGHT ©2020 Foshan LDX Machinery Manufacturing Co., Ltd. All Rights Reserved
Powered by: 300.cn