Welcome to LDX official website!

Foshan Li Dexin Machinery Manufacturing Co., Ltd.
Foshan Li Dexin Machinery Manufacturing Co., Ltd.

 WeChat

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Specializing in the production of TCT circular saw blades, TCT band saw blades, finger joint knives, flying knives, various non-standard CNC grinding machine production lines

Check category

The grinding steps of the saw blade grinding machine of the alloy saw blade grinding machine

  • Time of issue:2022-08-31 15:00

(Summary description)The grinding steps of the saw blade grinding machine of the TCT saw blade grinding machine

The grinding steps of the saw blade grinding machine of the alloy saw blade grinding machine

(Summary description)The grinding steps of the saw blade grinding machine of the TCT saw blade grinding machine

  • Time of issue:2022-08-31 15:00

The grinding steps of the saw blade grinding machine of the TCT saw blade grinding machine

 

1. Install the saw blade

Measure the outer diameter and center hole of the saw blade, select a centering washer, install the saw blade on the saw blade holder, and then lock it with the knurled nut of the saw blade holder, then loosen the saw blade holder locking screw, and then move the saw blade Align the outer diameter of the saw blade with the corresponding scale of the saw blade seat, and then tighten the screws. If the saw blade has broken teeth or new teeth, the guide grinding blade must be used. Generally speaking, it is easier to grind with guide pads, and guide pads should be used as much as possible.

2. Adjustment of circular saw blade rotation

If the rotation of the saw blade is not properly tight, the forward displacement of the saw blade will be inaccurate at this time. Therefore, after the saw blade is installed, rotate the circular saw blade counterclockwise with your left hand to test the tightness of its rotation. The M17 open-end wrench adjusts the locknut to make the rotation of the saw blade properly tight.

The principle of tightness is to eliminate the inertia of the saw blade rotation and the impact of the grinding wheel, not too tight.

3. Saw blade thickness adjustment

In order to make the grinding of the saw teeth average up and down, the center of the grinding wheel and the thickness center of the saw blade should be in a straight line.

4. Adjustment of cutting angle

Since the material to be cut by the saw blade is very variable, the appropriate cutting angle should be selected according to the material of the material to be cut. Cut the angle, and then tighten the clamping seat screw.

5. Tooth type transformation

Generally, there are two kinds of tooth types, one is triangular tooth and the other is curved tooth. The tooth type should be determined before grinding. To change the tooth shape, when the machine is running, use the L-shaped wrench to change the tooth shape change button to select the tooth shape to be ground.

Foshan Li Dexin Machinery Manufacturing Co., Ltd. is a professional saw blade grinding machine, TCT saw blade grinding machine, automatic saw blade grinding machine, CNC saw blade grinding machine, saw blade grinding machine, alloy saw blade grinding Saw blade grinding machine manufacturers such as machine, multi-blade saw grinding machine, etc.

Keyword:

CONTACT US

Tel:0086 757-82800952     Fax:0086 757-82800953 
QQ Email:1150353041@qq.com
Email:ldx@gdlidexin.com
Contact:Mr. Tu(0086 13823458229) Miss Lei(0086 13690538372
Add:No. 3, South District, Luanhe Industrial Zone, Luocun, Nanhai District, Foshan City

FOLLOW US

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Mobile website

Alibaba Mall

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

WeChat

COPYRIGHT ©2020 Foshan LDX Machinery Manufacturing Co., Ltd. All Rights Reserved