Welcome to LDX official website!

Foshan Li Dexin Machinery Manufacturing Co., Ltd.
Foshan Li Dexin Machinery Manufacturing Co., Ltd.

 WeChat

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Specializing in the production of TCT circular saw blades, TCT band saw blades, finger joint knives, flying knives, various non-standard CNC grinding machine production lines

Check category

Introduction of the operation steps of Lideixin saw tablet grinding machine

  • Time of issue:2023-08-30 15:55

(Summary description)Introduction of the operation steps of Lideixin saw tablet grinding machine

Introduction of the operation steps of Lideixin saw tablet grinding machine

(Summary description)Introduction of the operation steps of Lideixin saw tablet grinding machine

  • Time of issue:2023-08-30 15:55

When it comes to sawing tablet grinding machines, I believe many people do not understand, especially the moving steps of the full -automatic grinding machine of the alloy cycling saw. If you understand the grinding steps, it will be more convenient to use. Here is a small version that shares the grinding steps of the saw blade grinding machine.
1. Saw film installation
Measted the outer diameter and central hole of the saw tablet, select the mid -pad, install the saw blade on the saweta seat, lock it with the rolling snail of the sawnut, loosen the lock screw of the sawnons, and then move the saw section seat. , Make the outer diameter of the saw tablet with the corresponding scale of the saw blade, and then lock the screw. If the saw blade has broken teeth or new teeth, a guided grinding blade must be used. Generally speaking, it is easier to u
se guidance grinding discs and should be used as much as possible.


 

2. Adjust the tightness of the looseness of the automatic teeth machine
If the rotation of the saw blade is not tightened correctly, the forward displacement of the saw blade will be inaccurate. Therefore, after installing the saw blade, turn the round saw sheet with the clockwise of the left hand to test the looseness of the rotation. If it is not appropriate, adjust the lock nut with the M17 opening wrench to make the saw blade rotate and loosen.
The principle of tightness is to eliminate the inertia and the impact of the rotation of the saw blade. Don't be too tight.
3. Adjustment of the thickness of the saw blade
The center of the center of the sand wheel and the saw blade should be a straight line, so that the sharpening energy of the sawtooth is uniform up and down.
4. Adjustment of cutting angle
Because the materials to be cut in the saw blade change a lot, the appropriate cutting angle should be selected according to the material you want to cut. Cut off the angle and lock the screw of the clamping seat.
5. Tooth outline transformation
There are generally two types of teeth, one is a triangular teeth and the other is curved tooth. The tooth shape should be determined before grinding. When the machine is running, you should use the L -shaped wrench to change the tooth shape, and select the tooth shape to be grinded.
Second, the grinding start of the saw film grinding machine

1. Gap and claw adjustment
Before turning on, the distance between the sand wheel and the saw blade is kept at least 10mm, and then boot. Before adjusting the push, the distance between the sand wheel and the saw blade should be kept at least 10mm, and then the machine is activated to adjust the pushing stroke adjustment pole to make the impact point of the push
2. Setting of teeth height difference
After the machine starts, if the grinding is high and low, adjust the high and low teeth adjustment rod, and indicate the needle and scale display. After the machine is started, if the grinding is high and low, adjust the high and low tooth differential adjustment rod, and the indicator needle and scale are displayed as zero.
3. Start
After the above steps are completed, the wheel can be used to move the screw to move the head of the sand wheel towards the saw blade. When you are about to contact the saw blade, adjust the anti -tooth adjustment screw so that the original tooth concave surface of the saw tablet is aligned with the sand wheel (when the screw is adjusted in clockwise, the jagged movement moves forward, and the back of the tooth is more. ), Then move the head of the sand wheel to the saw blade. If the wheel is not grinded to the bottom of the teeth before moving forward, and grinding to the back when moving backwards, it means that it is not deep. On the contrary, it is too deep. At this time, adjust the depth of the teeth with the teeth deep, until the wheel can gently contact the bottom and the back of the tooth. During the grinding process, the shape of the sand wheel will slightly deform. If necessary, use a sandwheel to repair the stone to repair the sand wheel. In principle, as long as the cut angle is gently grinded, the corner of the gap will be grinded more.
4. Futing angle grinding
1) Change the tooth outline to a triangular tooth state
2) Zero the difference between high and low tooth
3) Adjust the claws to the distance of two teeth at a time
4) Adjust the grinding head from the outer diameter of the sand wheel
5) During the opposite teeth, the sand wheel should not encounter the cutting angle of the front teeth, otherwise it will waste the previous results
The above steps are the grinding steps of sawing blankets, do you understand? Mastering these steps can better use operations.

Keyword:

CONTACT US

Tel:0086 757-82800952     Fax:0086 757-82800953 
QQ Email:1150353041@qq.com
Email:ldx@gdlidexin.com
Contact:Mr. Tu(0086 13823458229) Miss Lei(0086 13690538372
Add:No. 3, South District, Luanhe Industrial Zone, Luocun, Nanhai District, Foshan City

FOLLOW US

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Mobile website

Alibaba Mall

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

WeChat

COPYRIGHT ©2020 Foshan LDX Machinery Manufacturing Co., Ltd. All Rights Reserved