Welcome to LDX official website!

Foshan Li Dexin Machinery Manufacturing Co., Ltd.
Foshan Li Dexin Machinery Manufacturing Co., Ltd.

 WeChat

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Specializing in the production of TCT circular saw blades, TCT band saw blades, finger joint knives, flying knives, various non-standard CNC grinding machine production lines

Check category

Daily maintenance of CNC gear grinding machine

  • Time of issue:2023-11-22 17:02

(Summary description)Daily maintenance of CNC gear grinding machine

Daily maintenance of CNC gear grinding machine

(Summary description)Daily maintenance of CNC gear grinding machine

  • Time of issue:2023-11-22 17:02

CNC grinding machine is a high-precision machine tool used for producing and processing floor plans and wheel profiles, widely used in mechanical equipment manufacturing, plastic granulation, instrumentation, automotive components and other fields# CNC grinding machine
Due to frequent use, long-term operation may inevitably encounter wear and common faults, so it is very important to do a good job in maintenance work.
1. Daily maintenance of forming surface grinding machine
(1) Maintain machine cleaning. After completing each day, the surface of the machine tool, the operating platform, and the intake system should be cleaned to prevent dust, water, and other debris from entering the internal structure of the machine tool.


(2) Check the lubricating grease. Before daily use, it is necessary to check the amount and quality of lubricating oil, immediately add and replace with new lubricating grease to ensure the normal operation of the intake system and prevent machine tool malfunctions due to poor smoothness.


(3) Regularly inspect the electrical system. The electrical system, wiring, power switch, and other components of the machine tool should be regularly checked for normal operation. If common faults are found, they should be properly handled to prevent circuit faults from causing machine tool safety accidents.


(4) Pay attention to work intensity. When working, it is necessary to operate according to the actual load to prevent the application of load or obvious deviation of structural parameters, and to prevent the machine tool from causing problems due to excessive load during operation.


(5) Pay attention to preventive measures. When operating the machine tool in practice, safety precautions should be taken to prevent accidental injuries and machine tool damage caused by operational errors.
2. Regular maintenance of forming surface grinding machines


(1) Regularly remove and replace the lubricating grease and filtering device. Regular dismantling and replacement of lubricating grease and filtering devices should be carried out based on the working hours and usage scenarios of the machine tool to ensure smooth and unobstructed air intake system and stable operation of the machine tool.


(2) Regularly clean the air supply and hydraulic transmission systems. The hydraulic oil pipes of the machine tool should be regularly cleaned to prevent pipeline blockages and debris from entering the internal structure of the machine tool, which may endanger the service life and accuracy of the machine tool.


(3) Regularly inspect the electrical system. The electrical system, wiring, power switch, and other components of the machine tool should be regularly checked for normal operation. If common faults are found, they should be properly handled to prevent circuit faults from causing machine tool safety accidents.


(4) Regularly check the accuracy of the machine tool. Regularly check the machining accuracy, flatness, and other performance parameters of the machine tool. If any problems are found, they should be handled properly to avoid affecting product quality due to machine tool accuracy not meeting standards.


(5) Regularly carry out maintenance and upkeep on the machine tool. According to the application of the machine tool, regular maintenance work such as cleaning, moistening, and tightening should be carried out to ensure the stability or long-term service life of the machine tool


TCT saw blade grinding machine  CNC grinding machine    Circular saw blade grinding machine      TCT saw blade grinding machine

Keyword:

CONTACT US

Tel:0086 757-82800952     Fax:0086 757-82800953 
QQ Email:1150353041@qq.com
Email:ldx@gdlidexin.com
Contact:Mr. Tu(0086 13823458229) Miss Lei(0086 13690538372
Add:No. 3, South District, Luanhe Industrial Zone, Luocun, Nanhai District, Foshan City

FOLLOW US

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Mobile website

Alibaba Mall

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

WeChat

COPYRIGHT ©2020 Foshan LDX Machinery Manufacturing Co., Ltd. All Rights Reserved