Welcome to LDX official website!

Foshan Li Dexin Machinery Manufacturing Co., Ltd.
Foshan Li Dexin Machinery Manufacturing Co., Ltd.

 WeChat

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Specializing in the production of TCT circular saw blades, TCT band saw blades, finger joint knives, flying knives, various non-standard CNC grinding machine production lines

Check category

Safety operating rules for metal circular saws Operating rules for metal circular saws

  • Time of issue:2023-12-29 16:55

(Summary description)Safety operating rules for metal circular saws Operating rules for metal circular saws

Safety operating rules for metal circular saws Operating rules for metal circular saws

(Summary description)Safety operating rules for metal circular saws Operating rules for metal circular saws

  • Time of issue:2023-12-29 16:55

1. The operator shall obtain the operation certificate after passing the examination, and shall be allowed to operate. The operator shall be familiar with the performance and structure of the machine, and shall abide by the safety and shift transfer system.

2. The sawing material should be put firmly, use the bearing edge or the whole block according to different cross-section shapes, or place it directly, and clamp firmly, and check whether all clamping is solid when installing multiple pieces.

3. Empty operation for about 10min, check the transmission parts, lubrication, hydraulic and cooling systems, check whether the vise is normal, until the lubricating oil temperature is greater than 20℃, before the formal work.

4. Before work, oil (fat) should be injected in strict accordance with the lubrication diagram, and keep the oil amount appropriate and the oil circuit unblocked.

5. The saw blade should be covered with a good safety cover, and pay attention to the human body not to approach the saw blade in operation.

6. Unloading (conveying) long material should pay attention to whether there is anyone around. Long materials should be equipped with brackets. The operation of more than two persons shall be directed by one person and coordinated with each other.

7. Select the appropriate cutting speed according to the variety and hardness of the cutting material.

8. Sawing materials, such as large bending, should not be installed in multiple pieces.

9. The operator shall not leave during operation. Turn off the power switch in case of power failure.

10. Check and clean the equipment after work, do daily maintenance work, put each handle (switch) in neutral (zero), disconnect the power switch, to achieve neat, clean, lubricating and safe.

11. Fill in the relevant records carefully.

Keyword:

CONTACT US

Tel:0086 757-82800952     Fax:0086 757-82800953 
QQ Email:1150353041@qq.com
Email:ldx@gdlidexin.com
Contact:Mr. Tu(0086 13823458229) Miss Lei(0086 13690538372
Add:No. 3, South District, Luanhe Industrial Zone, Luocun, Nanhai District, Foshan City

FOLLOW US

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Mobile website

Alibaba Mall

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

WeChat

COPYRIGHT ©2020 Foshan LDX Machinery Manufacturing Co., Ltd. All Rights Reserved