Beginners should follow the following tips when using the gear grinding machine:

Gear adjustment button: In the grinding process, if it is found that the grinding wheel is not accurate or the front Angle of the serrated tooth is too large for other reasons, the grinding wheel should be adjusted clockwise, pay attention to the locking nut of the tooth, so that the front Angle of the serrated tooth is lightly ground and the back Angle is slightly heavier until the overall polishing is completed.

Depth adjustment button: When grinding is close to completion, turn the depth adjustment button clockwise to make the tooth depth slightly shallower, and then speed up grinding and polishing for a while to improve the grinding quality of the blade.

Grinding wheel thickness: Select the appropriate thickness of the grinding wheel according to the size of the grinding gear. A 1.0 thick grinding wheel is suitable for most grinding scenarios, but for gears with too small or too large teeth, a thin or thick grinding wheel should be selected.

Grinding speed: thin saw blade and small saw blade choose fast grinding, thick saw blade and big saw blade choose slow grinding, the principle is easy to grind fast, and vice versa.

Index plate: The thickness of the index plate should be between five or six millimeters and seven or eight millimeters, and it is better to be thicker. The outside diameter of the indexing disc and the outside diameter of the saw blade should not be too large, but when the thickness of the grinding wheel is thin, the indexing disc with a larger outside diameter can be used, and when the thickness of the grinding wheel is thick, the indexing disc with a smaller outside diameter can be used.

Tooth shape: The tooth shape of this machine has no curved tooth bend and triangle tooth straight back, the actual grinding tooth shape between the curved tooth and triangle teeth are qualified. The tooth back approximate triangular teeth have a little curve is the best, suitable for all application scenarios.

Angle adjustment: In the grinding process, Angle adjustment is an essential part of the gear, affecting the accuracy and quality of the gear. It is necessary to adjust the front and back inclination Angle first, and then adjust the left and right inclination Angle, each adjustment Angle should be adjusted to 1 to 2 degrees, and repeatedly test to determine whether the Angle is correct.

Note: In the process of Angle adjustment, it is necessary to move the adjustment device slowly, and pay attention to protect the safety and service life of the grinding wheel. Factors such as gear material, gear machining accuracy, grinding wheel quality and Angle adjustment accuracy are considered to obtain more accurate and stable adjustment.

Through continuous practice and accumulation of experience, novices can gradually improve the level of tooth grinding technology.