Welcome to LDX official website!

Foshan Li Dexin Machinery Manufacturing Co., Ltd.
Foshan Li Dexin Machinery Manufacturing Co., Ltd.

 WeChat

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Specializing in the production of TCT circular saw blades, TCT band saw blades, finger joint knives, flying knives, various non-standard CNC grinding machine production lines

Check category

Diamond saw blade should pay attention to what aspects

  • Time of issue:2024-07-01 15:36

(Summary description)Diamond saw blade should pay attention to what aspects

Diamond saw blade should pay attention to what aspects

(Summary description)Diamond saw blade should pay attention to what aspects

  • Time of issue:2024-07-01 15:36

 

In fact, in the actual operation of the diamond saw blade has a lot of attention, only notice, diamond saw blade operation process, will not encounter problems, today grinding machine manufacturers to share with you the use of diamond saw blade should pay attention to aspects.

When the diamond saw blade is installed, the shaft, chuck and flange should be kept clean, the inner diameter of the flange is consistent with the inner diameter of the diamond saw blade, to ensure that the flange and the diamond saw blade are closely combined, the fine and accurate positioning pin is installed, and the nut is tightened. The size of the flange should be appropriate, and the outer diameter should not be less than 1/3 of the diameter of the diamond saw blade.

Before the facility equipment is started, ensure that it is safe to have a single person operate the facility equipment, point idling, check whether the facility equipment is turned correctly, there is no vibration, idling for a few minutes after the diamond saw blade is installed, and normal work after no slip, swing or beat. When working, the workpiece should be fixed, the fine and accurate positioning of the profile is fully in line with the direction of the cutting tool, so as not to cause abnormal cutting, side pressure or curve cutting can not be applied, the feed should be stable, to avoid the impact contact of the blade next to the workpiece, directly leading to the diamond saw blade damage, or the workpiece flies out, and accidents occur.

When working, it is found that the sound and vibration is abnormal, the cutting surface is rough, or the smell is generated, it must immediately terminate the operation, check as soon as possible, and eliminate the fault to avoid accidents. When starting cutting and stopping cutting, do not feed too fast to avoid broken teeth and damage. If cutting aluminum alloy or other metals, special cooling lubricant should be used to prevent the diamond saw blade from overheating, resulting in paste teeth, and other damage, affecting the quality and quality of the cutting product. Facilities and equipment chute and slag suction device to ensure smooth, to prevent slag accumulation into lumps, affecting production and processing and safety. When the diamond saw blade is dry cutting, please do not cut continuously for a long time, so as not to affect the service life of the diamond saw blade and the good cutting effect; Wet sheet cutting, should be cut with water, beware of leakage.

Grinding machine manufacturers share the above knowledge with you, if you understand this knowledge, it will be more smooth in use, and can improve work efficiency.

Keyword:

CONTACT US

Tel:0086 757-82800952     Fax:0086 757-82800953 
QQ Email:1150353041@qq.com
Email:ldx@gdlidexin.com
Contact:Mr. Tu(0086 13823458229) Miss Lei(0086 13690538372
Add:No. 3, South District, Luanhe Industrial Zone, Luocun, Nanhai District, Foshan City

FOLLOW US

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Mobile website

Alibaba Mall

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

WeChat

COPYRIGHT ©2020 Foshan LDX Machinery Manufacturing Co., Ltd. All Rights Reserved