Welcome to LDX official website!

Foshan Li Dexin Machinery Manufacturing Co., Ltd.
Foshan Li Dexin Machinery Manufacturing Co., Ltd.

 WeChat

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Specializing in the production of TCT circular saw blades, TCT band saw blades, finger joint knives, flying knives, various non-standard CNC grinding machine production lines

Check category

Saw blade grinding machine can not change the original angle

  • Time of issue:2019-04-03 10:22

(Summary description)Saw blade grinding machine can not change the original angle

Saw blade grinding machine can not change the original angle

(Summary description)Saw blade grinding machine can not change the original angle

  • Time of issue:2019-04-03 10:22
Saw blade grinding machine can not change the original angle
 
 
 
1. If the saw blade of the alloy head saw blade production line is not used immediately, it should be laid flat or suspended by the inner hole. The other saw blades should not be stacked with other objects or feet, and should be protected against moisture and rust.
 
2. When the saw blade is no longer sharp and the cutting surface is rough, it must be repaired in time. Grinding does not change the original angle and destroys the dynamic balance.
 
3. The inner diameter correction of the saw blade, the positioning hole processing, etc. must be performed by the factory. If the processing is poor, it will affect the product use effect, and may be dangerous. In principle, the reaming should not exceed the original aperture of 20mm, so as not to affect the balance of stress.
 
 
Product.jpg
 
How to ensure the normal operation of the internal gear grinding machine
 
The inspection of CNC machine tools can be divided into three levels: daily inspection, full-time inspection and production inspection. As a work system, the inspection of the internal gear grinding machine must be carried out carefully and persevered to ensure the normal operation of the machine.
 
1, full-time inspection
 
Responsible for the key parts and important parts of the internal gear grinding machine to carry out key inspection and preparation status monitoring and fault diagnosis and fixed inspection plan according to the cycle, make a good diagnosis record, analyze the maintenance results, and put forward suggestions for improving equipment maintenance management.
 
2, daily inspection
 
Responsible for checking the general parts of the machine, handling and checking the failure of the internal gear grinding machine during operation.
 
3, production check
 
Responsible for the inspection of the cycloidal gear grinding machine in production operation, and responsible for lubrication, fastening and other work.
Keyword:

CONTACT US

Tel:0086 757-82800952     Fax:0086 757-82800953 
QQ Email:1150353041@qq.com
Email:ldx@gdlidexin.com
Contact:Mr. Tu(0086 13823458229) Miss Lei(0086 13690538372
Add:No. 3, South District, Luanhe Industrial Zone, Luocun, Nanhai District, Foshan City

FOLLOW US

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Mobile website

Alibaba Mall

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

WeChat

COPYRIGHT ©2020 Foshan LDX Machinery Manufacturing Co., Ltd. All Rights Reserved