Welcome to LDX official website!

Foshan Li Dexin Machinery Manufacturing Co., Ltd.
Foshan Li Dexin Machinery Manufacturing Co., Ltd.

 WeChat

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Specializing in the production of TCT circular saw blades, TCT band saw blades, finger joint knives, flying knives, various non-standard CNC grinding machine production lines

Check category

Multi-blade saw grinding machine band saw blade grinding teeth have good universality

  • Time of issue:2019-04-11 20:27

(Summary description) The bi-metal band saw blade gear grinding machine has good universality. It can be matched with many types of band sawing machines and works well with many types of metal continuous sawing.

Multi-blade saw grinding machine band saw blade grinding teeth have good universality

(Summary description) The bi-metal band saw blade gear grinding machine has good universality. It can be matched with many types of band sawing machines and works well with many types of metal continuous sawing.

  • Time of issue:2019-04-11 20:27
Multi-blade saw grinding machine band saw blade grinding teeth have good universality
 
 
 
 
    The bi-metal band saw blade gear grinding machine has good universality. It can be matched with many types of band sawing machines and works well with many types of metal continuous sawing. As a tool, its quality can be evaluated and measured from multiple angles. The most important indicator is its service life. The universality of the bi-metal band saw blade is enough to reflect this tool. Good adaptability saves installation time and increases production efficiency.
 
    Another highlight of the saw blade is its bimetallic nature. The higher purity steel is harder and brittle. The strength is high but the toughness is not enough. The meaning of bimetal is to add 8% cobalt, which enhances the cutting hardness of the tooth. Performance spring steel has strong resistance to stress and can be used for longer strength and long-term continuous use.
 
Product.jpg
 
 
What is the phenomenon of the multi-blade saw grinding machine grinding head feeding the skateboard?
 
    What is the method of making a gear grinding machine? The wheel frame can be fed in a straight direction. The gear to be ground is supported by the indexing frame and the tailstock, and is longitudinally reciprocated through the table to grind the tooth surface, and the indexing is performed after each tooth is ground. On a machine with a helical gear, the grinding wheel can be rotated one point according to the helix angle of the workpiece, and the workpiece can be additionally converted in the reciprocating motion.
 
    If the machine wheel holder enables the grinding wheel to enter the internal gear workpiece, the internal gear can be ground. The forming wheel grinding machine has a simple layout, high efficiency and 5 precisions. It is suitable for batch production. The grinding wheel of the forming wheel grinding machine processed by the forming method is shaped into a tooth shape by the forming wheel dresser in the axial section. It is especially suitable for gears with a small number of teeth. When the grinding head of the gear grinding machine advances and retreats, the speed is uneven or there is an impact phenomenon. The hydraulic speed regulating valve is faulty, and the speed regulating valve is removed to clean or replace. The solenoid valve is out of order, removed, cleaned or replaced. If the guide rails are not parallel, loosen the adjustment screw and adjust again.
 
    The angular velocity imbalance of the gear grinding machine is that the corner speed is too small or the corner force is too fast, causing the corner swinging impact force to be too loud, and the positioning cylinder pressure is too large, and the throttle valve should be adjusted. The set flow rate of the right and left swing throttle valves is not appropriate, and the throttle valve should be adjusted.
Keyword:

CONTACT US

Tel:0086 757-82800952     Fax:0086 757-82800953 
QQ Email:1150353041@qq.com
Email:ldx@gdlidexin.com
Contact:Mr. Tu(0086 13823458229) Miss Lei(0086 13690538372
Add:No. 3, South District, Luanhe Industrial Zone, Luocun, Nanhai District, Foshan City

FOLLOW US

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Mobile website

Alibaba Mall

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

WeChat

COPYRIGHT ©2020 Foshan LDX Machinery Manufacturing Co., Ltd. All Rights Reserved