Welcome to LDX official website!

Foshan Li Dexin Machinery Manufacturing Co., Ltd.
Foshan Li Dexin Machinery Manufacturing Co., Ltd.

 WeChat

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Specializing in the production of TCT circular saw blades, TCT band saw blades, finger joint knives, flying knives, various non-standard CNC grinding machine production lines

Check category

Precautions for grinding of alloy saw blade grinding machine

  • Time of issue:2019-04-24 20:46

(Summary description)1. The grinding fluid is determined by the grinding fluid.

Precautions for grinding of alloy saw blade grinding machine

(Summary description)1. The grinding fluid is determined by the grinding fluid.

  • Time of issue:2019-04-24 20:46
Precautions for grinding of TCT saw blade grinding machine
 
 
 
1. The grinding fluid is determined by the grinding fluid.
 
2. The influence of the grinding mechanism on the grinding teeth.
 
3. Welding factors.
 
4. Influence of grinding wheel quality and particle size width.
 
5. Grinding head feed speed.
 
6, the grinding head feed amount, the choice of grinding wheel size is extremely important for the amount of feed.
 
7, the tooth extraction mechanism can not be ignored. Regardless of the structure, the gear grinding machine is designed and designed to the quality of the sharpening. When the machine is adjusted, the needle is pressed at a reasonable position on the tooth surface. It is also extremely important to move the tooth. When the tooth is retracted, the claw should be flexible. reliable.
 
 
Alloy saw blade grinding machine will produce collapsing teeth during cutting
 
1. The sawing machine is affected by the frequent vibration of the surrounding forging equipment, and the sawing bolt may be loosened, which causes the saw frame to shake. The band saw blade frequently suffers from the shock force during the cutting process, which may cause the disintegrating tooth phenomenon.
 
2. The lifting cylinder enters the air. If the oil quality is not good, the cylinder is worn, the control valve is out of control, etc., it may cause the saw frame not to fall at a constant speed, and the toothing phenomenon may occur.
 
3. The linearity of the three points of the driving wheel, the driven wheel and the guiding escapement does not reach the precision, the saw band cannot run in a straight line, and the cutting occurs either left or right and up and down unstable.
 
Original: Foshan Li Dexin Machinery Manufacturing Co., Ltd. All rights reserved --- Reprinted
Keyword:

CONTACT US

Tel:0086 757-82800952     Fax:0086 757-82800953 
QQ Email:1150353041@qq.com
Email:ldx@gdlidexin.com
Contact:Mr. Tu(0086 13823458229) Miss Lei(0086 13690538372
Add:No. 3, South District, Luanhe Industrial Zone, Luocun, Nanhai District, Foshan City

FOLLOW US

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Mobile website

Alibaba Mall

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

WeChat

COPYRIGHT ©2020 Foshan LDX Machinery Manufacturing Co., Ltd. All Rights Reserved