Li Dexin saw blade grinding machine is mainly processing machinery, must pay attention to the use and installation, Li Dexin saw blade grinding machine installation should understand the order of installation before and after, the following points of attention to its installation . When installing first, pay attention to the surrounding terrain, and you must find a place that is relatively flat and can be fixed in machinery. Many gear grinding machines have become more accurate thanks to the onboard measurement system.
Since the on-machine measurement is used, it is not necessary to remove the gear from the workbench and send it to other places for inspection, thereby avoiding secondary installation errors during rework. Li Dexin saw blade grinding machine Zui features: simple operation, easy to learn, easy to learn, easy to use, wide range of applications, suitable for grinding and opening of various saw blades; accurate positioning, high speed operation; The generation and generation of newer and improved, has developed the function of reducing machine loss in operation and saving working time.
The
saw blade hobbing machine is characterized by a wide processing range, using a grinding wheel, finishing a hardened cylindrical gear or a gear cutter tooth surface for high-precision operation. The machining accuracy of the ordinary gear hobbing machine is 7-6 (JB179-83), high precision. The gear hobbing machine is 4 to 3 stages. The large processing diameter of zui is up to 15 meters. The hobbing machine can cut spur gears, helical gears, and can also process various special toothed workpieces such as worm gears and sprockets.
1. Wear tight protective clothing before operation, fasten the cuffs, and the hem of the top should not be open. Do not wear gloves. Do not wear or remove clothes or install cloth around the machine to prevent the machine from being wounded. A safety helmet must be worn, and the tweezers should be placed in the cap. Do not wear skirts or slippers.
2. Prepare all the work before the machine starts. The vise is installed so that the center of the saw is in the middle of the sawing stroke. The material is placed horizontally on the vise and at right angles to the saw blade; if the angle is to be sawed, the vise is first adjusted to the desired angle, and the size of the saw is not greater than the size of the saw.
3. The saw blade must be tightened. The test car is idling for 3-5 minutes before the saw to make the air in the oil cylinder and the oil grooves on the hydraulic transmission device, and check whether the sawing machine is faulty or not.
4. The peak sawing pipe or sheet profile, the pitch should not be less than the thickness of the material. The saw should be retracted to a slow position during sawing and the amount of feed reduced.
5. When the sawing machine is in operation, it is not allowed to shift in the middle direction. The sawing material should be placed in positive, tight and stuck. The amount of cutting is determined according to the hardness of the material and the quality of the saw blade.
6. Hydraulic fluids and lubricants must be used in hydraulic transmission and lubrication devices. The coolant must be cleaned and replaced or filtered periodically.
7. When the material is about to be sawn, it is necessary to strengthen the observation and pay attention to safe operation.
8. Li Dexin saw blade grinding machine works, cut off the power supply, put the control handles back into the empty position, and do the cleaning work.
9. If the machine is found to be faulty during operation, it should immediately stop the construction and maintenance department to send the mechanic to repair.