Welcome to LDX official website!

Foshan Li Dexin Machinery Manufacturing Co., Ltd.
Foshan Li Dexin Machinery Manufacturing Co., Ltd.

 WeChat

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Specializing in the production of TCT circular saw blades, TCT band saw blades, finger joint knives, flying knives, various non-standard CNC grinding machine production lines

Check category

The maintenance of the alloy saw blade grinding machine is mainly the following three methods

  • Time of issue:2019-07-30 18:57

(Summary description)The maintenance of the TCT saw blade grinding machine is mainly the following three methods

The maintenance of the alloy saw blade grinding machine is mainly the following three methods

(Summary description)The maintenance of the TCT saw blade grinding machine is mainly the following three methods

  • Time of issue:2019-07-30 18:57
The maintenance of the TCT saw blade grinding machine is mainly the following three methods
 
 
 
First, strictly abide by the rules of numerical control operation. The maintenance, operation and programming personnel of the CNC machine tools should be trained in the technical training of the post, and the relevant knowledge of the mechanical, pneumatic and numerical control systems of the machine tools used can be familiarized, and also can be controlled by CNC machine tools. Use the instructions correctly and reasonably to minimize any malfunctions caused by the operation. In general, most of the faults in the CNC gear grinding machine are caused by the staff's operation and programming is not familiar enough, and the equipment manager should develop a more complete operating procedure, strictly requiring the operator to follow the operating procedures. Operate and fill in the shift record.
 
 
Second, monitor the voltage grid in the CNC system. Generally speaking, the range of fluctuations permitted in the numerical control system is 0.85-1.1. If it exceeds this range, the operation of the numerical control system will be unstable, which may cause damage to electronic components. To this end, attention should be paid to fluctuations in the voltage grid. For some places where the quality of the grid is relatively poor, it is necessary to configure some regulated power supplies in time to reduce the failure of the CNC gear grinding machine.
 
Third, the lubrication part of the alloy saw blade grinding machine is regularly inspected. In order to ensure the normal operation of mechanical components, regular inspections should be carried out in strict accordance with the instructions used by the machine tool, and regular lubrication should be carried out at the same time.
 
Keyword:

CONTACT US

Tel:0086 757-82800952     Fax:0086 757-82800953 
QQ Email:1150353041@qq.com
Email:ldx@gdlidexin.com
Contact:Mr. Tu(0086 13823458229) Miss Lei(0086 13690538372
Add:No. 3, South District, Luanhe Industrial Zone, Luocun, Nanhai District, Foshan City

FOLLOW US

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Mobile website

Alibaba Mall

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

WeChat

COPYRIGHT ©2020 Foshan LDX Machinery Manufacturing Co., Ltd. All Rights Reserved