Welcome to LDX official website!

Foshan Li Dexin Machinery Manufacturing Co., Ltd.
Foshan Li Dexin Machinery Manufacturing Co., Ltd.

 WeChat

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Specializing in the production of TCT circular saw blades, TCT band saw blades, finger joint knives, flying knives, various non-standard CNC grinding machine production lines

Check category

Automatic saw blade grinding machine safety knowledge to remember

  • Time of issue:2019-09-24 19:37

(Summary description)Automatic saw blade grinding machine safety knowledge to remember

Automatic saw blade grinding machine safety knowledge to remember

(Summary description)Automatic saw blade grinding machine safety knowledge to remember

  • Time of issue:2019-09-24 19:37
Automatic saw blade grinding machine safety knowledge to remember
 
 
 
1. It is forbidden to bring scarves and gloves, and wear goggles when cutting at high speed.
 
2. When loading and unloading chucks and large work and fixtures, the surface of the bed should be covered with wooden planks. It is not allowed to drive the loading and unloading chucks. Remove the wrench immediately after loading and unloading the workpiece. Do not brake by hand.
 
3. No tools, gauges or other things should be placed on the bed, the knife holder or the bed surface.
 
4, the loading and unloading of the workpiece should be firm, long sleeve can be used for clamping, it is forbidden to hit with a hammer, the claws of the sliding wire are not allowed to use.
 
5, automatic saw blade grinding machine processing slender workpiece to use thimble, with the knife holder. The front extension of the front (bedside box) shall not exceed 20 to 25 times the diameter of the workpiece. When the rear of the front (headboard) protrudes more than 300 mm, the bracket must be added. It is necessary to set up protective railings.
 
 
6. When polishing the workpiece with a trowel, the right hand should be in front and the left hand should be behind, and the body should leave the chuck. It is forbidden to sand the workpiece on the workpiece by sanding cloth. It should be pressed into the workpiece in a straight strip according to the method of using a trowel.
 
7. When the inner hole of the car is not allowed to use a boring tool to chamfer, when using the sand cloth to light the inner hole, it is not allowed to deepen the finger or arm to polish.
 
8. When the automatic saw blade grinding machine processes the eccentric workpiece, it must be added with balanced iron, and it must be fastened firmly, and the brake should not be too strong.
 
9. Tapping or threading must use tools. It is not allowed to drive the wire frame (or the mixing frame) with one hand.
 
10, when cutting large materials, should leave enough margin, remove the break, so as not to fall off when the material is cut. When the small material is cut, it is not allowed to pick it up by hand.
Keyword:

CONTACT US

Tel:0086 757-82800952     Fax:0086 757-82800953 
QQ Email:1150353041@qq.com
Email:ldx@gdlidexin.com
Contact:Mr. Tu(0086 13823458229) Miss Lei(0086 13690538372
Add:No. 3, South District, Luanhe Industrial Zone, Luocun, Nanhai District, Foshan City

FOLLOW US

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Mobile website

Alibaba Mall

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

WeChat

COPYRIGHT ©2020 Foshan LDX Machinery Manufacturing Co., Ltd. All Rights Reserved