Welcome to LDX official website!

Foshan Li Dexin Machinery Manufacturing Co., Ltd.
Foshan Li Dexin Machinery Manufacturing Co., Ltd.

 WeChat

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Specializing in the production of TCT circular saw blades, TCT band saw blades, finger joint knives, flying knives, various non-standard CNC grinding machine production lines

Check category

CNC saw blade grinding machine manufacturers introduce the requirements of the grinding angle of the saw blade grinding machine

  • Time of issue:2019-10-21 11:53

(Summary description)CNC saw blade grinding machine manufacturers introduce the requirements of the grinding angle of the saw blade grinding machine

CNC saw blade grinding machine manufacturers introduce the requirements of the grinding angle of the saw blade grinding machine

(Summary description)CNC saw blade grinding machine manufacturers introduce the requirements of the grinding angle of the saw blade grinding machine

  • Time of issue:2019-10-21 11:53
CNC saw blade grinding machine manufacturers introduce the requirements of the grinding angle of the saw blade grinding machine
 
 
 
 
1. Standard: The front corner is determined according to the material being cut. Error ≤ 1 ° rake angle error ± 1 °, tooth surface roughness Ra ≤ 0.02, and no grinding marks.
 
2, test:
 
A. Use the angle detector to test the standard requirements in all front corners.
 
B. The straightness inspection of the edge of the blade grinding machine meets the tolerance requirements.
 
C. Other items of saw blade grinder have not been affected by the test, and the appearance defects are qualified.
 
D. The saw blade grinding machine remains the same as the sawtooth, and there must be no obvious difference.
 
E. Every tooth inspection, production can be freely checked.
 
3, CNC saw blade grinding machine manufacturers to introduce the grinding angle operation:
 
A. Using a rake grinder and a diamond grinding wheel, the surface of the grinding wheel remains perpendicular to the axis.
 
B. First coarse grinding diamond wheel with 180#, fine grinding for 240#-280#, grinding 320#-340#320.
 
C. Adjust the device to the processing position and the required angle. When loading the start-up test, a. After the inspection, the two teeth are removed to meet the requirements of the start-up grinding. The feed grinding should be stable and the feed is less (≤0.111).
 
D. After each piece of grinding machine, it is necessary to gradually self-test, and it is necessary to re-grind after failing.
 
E. The coolant is fully ground.
 
4. Management:
 
A. The quality of production is controlled by the operator.
 
B. Product inspection by the inspector.
 
C. Supervise the production quality management responsibility system.
 
Keyword:

CONTACT US

Tel:0086 757-82800952     Fax:0086 757-82800953 
QQ Email:1150353041@qq.com
Email:ldx@gdlidexin.com
Contact:Mr. Tu(0086 13823458229) Miss Lei(0086 13690538372
Add:No. 3, South District, Luanhe Industrial Zone, Luocun, Nanhai District, Foshan City

FOLLOW US

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

Mobile website

Alibaba Mall

Foshan Li Dexin Machinery Manufacturing Co., Ltd.

WeChat

COPYRIGHT ©2020 Foshan LDX Machinery Manufacturing Co., Ltd. All Rights Reserved