What is the problem with the saw blade grinding machine?

 

 

The sawing path is located at the tip of the sawtooth to cut the wood and the specific part of the sawing. Now let's tell you what the function of the sawing is: cut the wood fiber through its cutting edge and the inner and outer edge angles to complete the cutting task. In the process of row sawing, the kerf is enlarged, the friction between the saw blade and the cutting surface is reduced, and the saw blade is prevented from running due to friction and heat. During the sawing process, the cutting direction is controlled and the sawing advances.

 

The main reason for the saw blade grinding machine

One is caused by the saw blade not being correctly formed under the premise that the saw blade has the correct shape of the sawtooth;

 

The second is caused by the incorrect shape of the saw blade serration under the premise that the saw blade is correct;

 

The third is that the saw blade is centered on the center of the saw blade. When the two sides are subjected to resistance or reaction forces, the saw blade has an offset (referring to deformation. Even if the saw blade is pulled tightly, this phenomenon will occur).