Full CNC alloy saw blade front and rear angle grinding machine with a diameter of 900MM-1000MM-1200MM-1500MM

LDX-026 (A) Grindable outer diameter ＆ 150-1500MM servo swing angle fully CNC circular saw blade grinding machine
Technical features:
This machine refers to the characteristics of domestic and foreign models and is a mechanical equipment for grinding and reusing alloy circular saw blades. It is also a necessary equipment for producing new alloy circular saw blades. The standard model of this equipment can grind all tooth shapes included in the front and rear corners of alloy circular saw blades with a diameter of ＆ 150- ＆1500mm. A single machine can grind 10 to 30 alloy circular saw blades every 8 hours, which is a commonly used equipment for saw blade manufacturers and saw blade manufacturers. PLC control, color touch screen display, and precision servo motor are used in the feed system. The flat ladder teeth can be polished in one go, and the same teeth can be repeatedly polished 2-3 times. The grinding accuracy can be controlled within 0.08mm, and the operation is simple and easy to learn without the need for unlocking and locking buttons. The system automatically locks according to operating requirements, and can fully extend the service life of the alloy saw blade while sharpening it, Each tablet can be reused 15-30 times, and this device has received praise from a large number of users.
Technical parameters:
Machining saw blade diameter range: ＆ 100- ＆1500mm
Saw blade center aperture: ＆ 10- ＆ 220mm
Saw blade thickness (steel plate): 1-12
Tooth pitch: 7-150mm
Tooth surface angle: -22 ° -+22 °
Tooth top back angle: 6-45 °
Left and right inclination of teeth: tooth top/tooth surface 45 °
Blade grinding stroke range: maximum 25mm (adjustable) teeth/minute
Continuously variable speed: 0.5-6mm/s
Working speed: maximum 12 teeth/minute
Feed stroke: 1-32mm (continuously variable)
Grinding wheel size (outer diameter X hole): ＆125mmX ＆32mm
Negative chamfer grinding: -27 °
Rotating angle of grinding head: 90 °, 180 °
Grinding wheel rotation speed: 26m/s
Flow rate of coolant water pump: 501/min
Volume of coolant cylinder: 120L
Total power: 2.6KW
Voltage: three-phase 380V
Total mechanical capacity: 1250KG
Mechanical size (length X model X height): 1600X1300X1800MM